Performing an engine swap on a 2017 Honda Civic sedan is a complex process that requires advanced automotive skills and experience. Please note that this is not a comprehensive guide and you should always consult a professional mobile mechanic for assistance. Also, the cost of tools and labor can vary depending on location and other factors.
Tools needed for the engine swap:
- Socket set (standard and metric)
- Wrench set (standard and metric)
- Screwdriver set
- Pliers
- Pry bar
- Engine hoist or cherry picker
- Engine stand
- Torque wrench
- Oil filter wrench
- Timing light
- Compression tester
- Fuel pressure gauge
Where to get the tools: Tools can be purchased at automotive stores such as AutoZone, Advance Auto Parts, Napa Auto Parts, or online at Amazon, Harbor Freight, or Tooltopia.
Estimated labor time: The labor time for an engine swap on a 2017 Honda Civic sedan can vary depending on the experience and expertise of the mechanic. However, it typically takes around 16 to 20 hours of labor to complete an engine swap.
Step-by-step process for engine swap:
- Disconnect the battery and remove the hood.
- Drain the coolant and oil from the engine.
- Remove the air intake, exhaust, and engine accessories such as the alternator, power steering pump, and AC compressor.
- Disconnect the wiring harness, vacuum lines, and fuel lines from the engine.
- Remove the transmission and engine mounts.
- Use an engine hoist or cherry picker to lift the engine out of the engine bay and onto an engine stand.
- Remove the oil pan, oil pump, timing belt or chain, and cylinder head from the engine.
- Transfer any necessary parts from the old engine to the new engine, such as the oil pump, timing belt or chain, and cylinder head.
- Install the new engine onto the transmission and engine mounts.
- Reconnect the wiring harness, vacuum lines, and fuel lines to the engine.
- Install the air intake, exhaust, and engine accessories such as the alternator, power steering pump, and AC compressor.
- Refill the engine with oil and coolant.
- Reconnect the battery and start the engine.
- Use a timing light, compression tester, and fuel pressure gauge to check the timing, compression, and fuel pressure of the engine.
- Adjust the timing and fuel pressure as needed.
Again, please note that this is a general guide and the actual process may vary depending on the specific details of your vehicle and the experience of the mechanic performing the swap. It is highly recommended to seek professional help for an engine swap on a 2017 Honda Civic sedan
